Univ.-tastaturint. binaerindgang dobbelt KNX/EIB

· Free assignment of switching, dimming, blinds and
Value transmitters for two inputs or pulse counters a
switching counter
· Blocking object for blocking individual inputs
· Behavior when restoring the bus voltage can be parameterized separately for each input
· Telegram speed limit
· Switching function: two independent switching objects for each
input available and can be activated individually, command can be set independently when pressed (ON, OFF, TOGGLE, no response), cyclic sending of switching objects depending on pressing a selectable value.
· It is possible to set single-surface and double-surface control, time between dimming and switching, dimming step size, telegram repetition and telegram transmission stop.
Blind function: the command can be set with a rising edge (no function, UP, DOWN, TOGGLE), parameterizable operating concept. Adjustable long-term operation, adjustable slat setting time.
· Function of the transmitter of values and extension of the light scene: Press (button as
NO contact, button as NC contact, switch) and value on the edge configurable, setting the value with a long button. Pressing the key to transmit the values possible, the extension of the light scene with the memory function. · Temperature value transmitter and brightness value transmitter functions
· Pulse counter function
· Switch counter function
· Function as switching output: Behavior in case of bus failure and return, on / off delay or time switching function, timing of outputs (LED flashing).
It is possible to assign different functions or block them in the process independently of each other. Both inputs can be configured as outputs (max. 2 mA). Free assignment of switching, dimming, blinds and value transmitter functions to both input or pulse counters and switching counters.

Number of entries: 2
3-core cable set
Temperature range: -5ºC to + 45ºC