TRANSPONDER HOLDER WITH PLEXI SUPPORT FRAME- TOTAL SILVER
The TH22AxxKNX transponder holder is an EIB / KNX device fitted in rectangular boxes with 2 or 3 modules- and can be used for detecting and monitoring the presence of customers or service staff in a room.
A range of colours is available for plastic housing- and glass finishes can be ordered separately- and it can be connected to all types of environments.
The device has two physical ON / OFF inputs for controlling an open / close door contact or other signals (e.g. window contacts- bathroom alarm pulls- etc.).
On the device there are two relays to control the door lock and to control the courtesy lighting- or for any other freely configurable use. The front of the transponder is illuminated if no light is available (for dark locations)- goes out if the card is invalid- and flashes for 3 seconds if access is not allowed.
Card validation is made by checking the following data: -number system- if the code is coherent- it verifies the date field (if enabled) to verify validity (if this hasn?t expired).
It then checks the password with all the associated and enabled codes (time- customer number- service number). If all the conditions matched- then is possible to open the door and- if set- turns on the courtesy light and sends the result to the bus. Configuration via ETS.
Forventet leveringstid: 3-7 hverdage