NIKO DIMMER SWITCH KNX RF

This wireless and battery-less dimmer in Niko design can function as a switch, a dimmer, a control for roller shutters or a scenario selector in a KNX® system. This dimmer works together with the KNX® wireless media switch (360-33001) that sends KNX® commands to the KNX® bus. This is how you can easily expand your KNX® system without breaking down walls or running extra cables. Follow the installation and wireless communication guidelines for best results.

Configure the dimmer pressures with the ETS software, which you can find on the KNX® association’s website together with the KNX® programming adapter (360-39001). The following communication devices can be connected to the taps: single channel, damper and roller shutter control. The supported functions are: turn on, turn off, darken, brighten, scenario number, send value in percent, in angle, in 2 bits, in 8 bits. You can configure up to six pressure combinations.

The dimmer can be mounted in a Eurobox that is screwed to the wall (screws not included) or glued to a flat surface with double-sided tape (supplied). A cover and frames must be ordered separately. The dimmer can be combined with all Niko Pure, Niko Intense and Niko Original frames in the color you want.