FANCOIL CONTROLLER 0-10v
2.452,50 kr.
The Fan Coil Unit Controller is used to control fan coil units- floor heating or switch actuators.
Depending on the design of the device- fan coil units are used in 2-pipe or 4- pipe systems.
It controls up to 3 fan speeds (Relay or 0- 10V outputs) as well as heating or cooling valves (Proportional or electrothermal valve) respectively.
The mode of control is based on two-step control or a time- discrete PI controller with setpoint/actual value comparison. The valves and the fan can be regulated directly by devices via the closed loop of this controller.
When the Fan Coil Unit Controller is used in floor heating- it can control up to seven channel. All of the floor heating channel control is used a time-discrete PI controller with setpoint / actual value comparison.
Forventet leveringstid: 3-7 hverdage
Yderligere info
Eelectron TC17B01KNX Fan Coil 5-output 0-10V
GTIN: 8054144521909
Bus System: KNX (TP)
Degree of protection: IP20
Mounting: DIN rail
The fan-coil unit controller is used to control fan-coil units, underfloor heating or switch drives. Depending on the design of the device, fan coil units are used in 2- or 4-pipe systems.
It controls up to 3 fan speeds (relay or 0-10V outputs), as well as heating or cooling valves (proportional or electrothermal valve). The regulation method is based on a two-stage regulation or a time-discrete PI controller with a comparison of the required/actual value. The valves and fan can be regulated directly by the devices through the closed loop of this regulator. When used in underfloor heating, the Fan Coil controller can control up to seven channels.
All floor heating channels are used by a discrete time PI controller with a comparison of the desired / actual value.