Elsner Suntracer KNX basic 230 V AC

Brightness measurement: The current light intensity is measured by means of a sensor.

Wind measurement: The measurement of wind speed is accomplished electronically and thus noiseless and reliable even in case of hail, snow and minus temperature. Air swirls and up-draught in the radius of the weather station are collected, too.

Precipitation perception: The surface of the sensor is heated so that only drops and flakes are recognised as precipitation but not fog or dew. If it stops raining or snowing, the sensor dries quickly and the precipitation message ends.

Temperature measurement

Threshold values can be adjusted per parameter or via communication objects

8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits.

Configuration is accomplished by means of the KNX software ETS.