DIN 1 OUT – 700W – UNIVERSAL DIMMER SLAVE
DM01D01KNX is a KNX power dimmer 1-channel acting as a Master Dimmer to which you can connect up to two Slave Modules (cod. DM01D01ACC) with identical characteristics to the Master power dimmer and connected to it by a local two wires bus.
Dimmer DM01D01KNX can be used in one of the following configurations:
– Trailing Edge: The dimmer turns off part of the final part of the waveform of the input voltage resulting in reduced lamp output. This load regulation is used for resistive or capacitive loads (typically halogen lamps with electronic transformer or incandescent lamps)
– Leading Edge: The dimmer turns off part of the initial part of the waveform of the input voltage- resulting in reduced lamp output. This load regulation is used for inductive loads (typically ferromagnetic transformers or toroidal)
The three channels are independent and can therefore operate on different phases of the same three phase systems respecting the limit of 230Vac between phase and neutral.
The product is intended for installation on DIN rail in electrical distribution cabinets.
Forventet leveringstid: 5-10 hverdage
Yderligere info
Lignende produkter
Relaterede varer
-
CENTRALE PRODUKTER
ABB KNX ANALOG UDGANGSMODUL 4-KANAL
-
CENTRALE PRODUKTER
DIM4-230/1-10V/16/H/KNX
-
CENTRALE PRODUKTER
DIM4-230/UNI/250/H/KNX Lysdæmper
-
CENTRALE PRODUKTER
Analog outputs Extension Analog outputs extension 4 channels 0-10V
-
CENTRALE PRODUKTER
Dimming Extension 2x250W Dimming extension 2 channels 250W 230VAC