BEG PD2N-KNX-DX-DM
- KNX presence sensor with integrated KNX-BUS connection
- KNX Secure ready
- HCL / RGB control
- Parameterization of ETS 5 for integration into KNX-BUS systems
- Individual sensitivity adjustment of the PIR sensor
- Mixed light measurement using the interior and exterior lighting sensor
- Intelligent semi-automatic operation, presence independent control operation (Twilight Detector), fully automatic operation
- 1 x light channel (for regulation or on/off) 1 x slave output, 3 separate HVAC outputs
- Rules of three light groups via offset (external influence possible)
- Short presence, self-regulation of the drive-up time, corridor function
- Various locking functions
- Soft start
- Two logic modules
- Call light scenes
- Disableable status indicators
- Temperature sensor and microphone
- The product database, which can be imported into the ETS system, is included in the delivery or can be downloaded from the BEG website.
- Master-Slave setup to extend the detection range
- Extensive optimization options for light measurement
- Output of the measured light value to the bus
- Adaptation of damping curve
- Bi-directional remote control with IR adapter and BEG smartphone app
- Pin code
- IR remote control via optional IR remote control
- Freely programmable 5-button remote control (accessory)
- Programming mode (physical address) operated via IR
- HVAC mode (1 = comfort, 2 = standby, 3 = economy, 4 frost/heat protection)
- Manual influence via external KNX buttons possible
- Monitoring the function (Heartbeat, cyclic sending)
- Presence simulation
- Forced shutdown
- Intelligent central off function
- Abschaltvorwarnung
- Burn-in function with burn-in time between 1 – 100 hours, which can be freely set
- Behavior on the return of the bus voltage definable on choice
- Varying safety violations after switching off the fixtures
- Application examples:
offices, meeting rooms, schools, kindergartens, hospitals
Forventet leveringstid: 1-3 hverdage
